Removing a window spiral balance might seem complicated, but with the right tools and some patience, it can be done. Here’s a step-by-step guide on how to remove a window spiral balance off of a window:
1. Identify the location of the spiral balance: Start by identifying the location of the spiral balance on the window. Typically, spiral balances are located on either side of the window sash.
2. Remove the window sash: The first step is to remove the window sash from the window frame. To do this, open the window fully and tilt the sash towards you. You may need to loosen the screws on the sash to do this.
3. Locate the spiral balance rod: Once the sash is removed, locate the spiral balance rod that runs through the window frame. This rod is typically made of metal and is attached to the window sash by a bracket.
4. Release the tension on the spiral balance: The next step is to release the tension on the spiral balance so that you can remove it from the window. This is done by turning the balance tension tool counterclockwise until the tension is fully released.
5. Remove the spiral balance: Once the tension is released, you can remove the spiral balance from the window. This is typically done by pulling the balance rod out of the bracket on the window sash and then sliding the balance out of the window frame.
6. Install the new spiral balance: After the old spiral balance is removed, you can install the new one. To do this, slide the new balance into the window frame and attach the balance rod to the bracket on the window sash.
7. Tension the new spiral balance: Once the new balance is installed, use the tensioning tool to tension the balance. This is done by turning the tool clockwise until the desired tension is reached.
8. Reinstall the window sash: Finally, reattach the window sash to the window frame and test the window to ensure that it opens and closes smoothly.
By following these steps, you can remove a window spiral balance off of a window and replace it with a new one. However, if you’re not comfortable doing this yourself, it’s always best to call in a professional to ensure that the job is done correctly.